Table of Contents
Advertisement
Carry only the key you want to register,
and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
2
Check that the shift position is in P.
3
Recall the driving position that you
want to record.
4
While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Cancelation procedure
■
1
Carry only the key you want to can-
cel and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled prop-
erly.
2
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
3
While pressing the "SET" button,
press and hold the door lock switch
3-3. Adjusting the seats
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Recall procedure
■
1
Make sure that the doors are
locked before recalling the driving
position. Carry the electronic key
that has been registered to the driv-
ing position, and then unlock and
open the driver's door using the
smart entry & start system or wire-
less remote control.
The driving position will move to the
recorded position (not including the steer-
ing wheel and head-up display).
If the driving position is in a position that
has already been recorded, the seat and
outside rear view mirrors will not move.
2
Turn the engine switch <power
switch> to ACCESSORY mode or
IGNITION ON mode <ON
mode>.
The steering wheel and head-up display
will move to the recorded position.
■
Recalling the driving position using the
memory recall function
Different driving positions can be regis-
●
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
●
If the passenger's door is unlocked with
the smart entry & start system, the driving
position cannot be recalled. In this case,
press the driving position button which
has been set.
■
Customization
The unlock door settings of the memory
recall function can be changed.
(Customizable features: P.436)
139
3
Advertisement
Table of Contents
