372
6-3. Do-it-yourself maintenance
there is no light leaking from the bulb base.
WARNING
■
Replacing light bulb
Turn off the light. Do not attempt to
●
replace the bulb immediately after
turning off the light.
The bulb become very hot and may
cause burns.
●
Do not touch the glass portion of the
light bulb with bare hands. When it is
unavoidable to hold the glass portion,
use and hold with a clean dry cloth to
avoid getting moisture and oils on the
bulb.
Also, if the bulb is scratched or
dropped, it may blow out or crack.
●
Fully install light bulb and any parts
used to secure it. Failure to do so may
result in heat damage, fire, or water
entering the light unit. This may dam-
age the light or cause condensation to
build up on the lens.
■
To prevent damage or fire
●
Make sure bulb is fully seated and
locked.
●
Check the wattage of the bulb before
installing to prevent heat damage.