240
4-5. Using the driving support systems
Dynamic radar cruise con-
*
trol
*
: If equipped
In vehicle-to-vehicle distance con-
trol mode, the vehicle automati-
cally accelerates and decelerates
to match the speed changes of the
preceding vehicle even if the accel-
erator pedal is not depressed. In
constant speed control mode, the
vehicle runs at a fixed speed.
Use the dynamic radar cruise con-
trol on freeways and highways.
Vehicle-to-vehicle distance con-
trol mode (P.242)
Constant speed control mode
(P.245)
System components
Meter display
■
Display
A
Set speed
B
Indicators
C
Operation switches
■
Vehicle-to-vehicle distance switch
A
"+RES" switch
B
Cruise control main switch
C
Cancel switch
D
"-SET" switch
E
WARNING
Before using dynamic radar cruise
■
control with full-speed range
●
Driving safely is the sole responsibility
of the driver. Do not rely solely on the
system, and drive safely by always pay-
ing careful attention to your surround-
ings.
●
The dynamic radar cruise control with
full-speed range provides driving
assistance to reduce the driver's bur-
den. However, there are limitations to
the assistance provided.
Read the following conditions care-
fully. Do not overly rely on this system
and always drive carefully.
• When the sensor may not be correctly
detecting the vehicle ahead: P.247
• Conditions under which the vehicle-
to-vehicle distance control mode may
not function correctly: P.248