370
4-5. Using the driving support systems
CAUTION
Handling the driver monitor sensor (vehicles with driver monitor sensor)
■
Observe the following to ensure the driver monitor sensor can function effectively.
Failure to do so may result in a malfunction or may prevent the system from correctly
determining the direction the driver is facing, resulting in an unexpected accident.
Do not disassemble, damage, lift or pull on the sensor.
●
Do not touch the sensor while driving.
●
Do not wet or spill water on the sensor.
●
Do not drop anything on or allow anything to hit against the sensor. Do not subject the
●
sensor to an impact.
Make sure that there are no scratches, dirt or stickers on the side of the sensor that
●
faces the driver.
Do not place any objects in front of the side of the sensor that faces the driver or
●
cover the sensor.
Determining the direction the driver is facing (vehicles with driver monitor sensor)
■
The direction the driver is facing may not be determined correctly if the following con-
ditions exist:
There is an object between the driver monitor sensor and the driver' s face, such as
●
when the sensor is blocked.
A part of the driver' s face is covered.
●
The sensor or the driver' s face is exposed to intense light such as sunlight.
●
The driving posture is improper.
●
NOTICE
Precautions for cleaning the driver monitor sensor (vehicles with driver monitor sen-
■
sor)
Gently wipe the sensor with a soft cloth to prevent damage.
●
Wipe any excess dirt with a cloth dampened with neutral detergent, all liquids having
●
been wrung out of the cloth. After that, wipe again with a dry cloth.
Do not use benzene, thinner, glass cleaners, wax, etc.
●
GX460_OM_OM60L72U_(U)
I n f o r ma t i o n P r o v i d e d b y :