Table of Contents
Advertisement
Accent color
■
Select to change the accent color on
the screen, such as the cursor color.
Rev indicator
■
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indicator
will be displayed.
Rev peak
■
Select to set the rev peak on/off.
Clock
■
Select to switch between 12-hour dis-
play and 24-hour display.
Initialization
■
Select to reset the meter display set-
tings.
Suspension of the settings display
■
In the following situations, operation of the
settings display will be temporarily sus-
pended.
When a warning message appears on the
●
multi-information display
●
When the vehicle begins to move
Customization
■
The settings can be changed on
multi-information display.
Settings of the driving assist systems
●
(P.436)
●
Vehicle settings (P.105, 352, 354,
436)
2-1. Instrument cluster
WARNING
Cautions during setting up the dis-
■
play
As the engine <hybrid system> needs to
be running <operating> during setting up
the display, ensure that the vehicle is
parked in a place with adequate ventila-
tion. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
NOTICE
While setting up the display
■
To prevent 12-volt battery discharge,
ensure that the engine is running <hybrid
system is operating> while setting up the
display features.
Suggestion function
Displays suggestions to the driver in
the following situations. For some sug-
gestions, a response to a displayed
suggestion can be selected. To select a
response, use the meter control
switches.
The suggestion function can be turned
on/off.
of the
Suggestion to turn on the head-
■
lights
If the headlight switch is in other than
or
, and the vehicle speed is 5
km/h (3 mph) or higher for a certain
amount of time when the surroundings
are dark, a suggestion message will be
displayed.
103
2
Advertisement
Table of Contents
