100
2-1. Instrument cluster
tem> was started, respectively
Distance (range/after start)
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine <hybrid system> was started
respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
<power switch> off. If the vehicle is refu-
eled without turning the engine switch
<power switch> off, the display may not
be updated.
*1
: Displayed when the item is set in "Drive
Info 1" or "Drive Info 2".
*2
: The function can be reset by pressing
"OK" of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
Eco Driving Indicator/engine oil
■
temperature gauge (LC500)
P.92, 94
Hybrid System Indicator/motor
■
power display (LC500h)
P.92
Energy monitor (LC500h)
■
P.110
Tire pressure
■
P.349
Gear positions
■
*1
Displays the current shift range or gear
position when the shift position is in D
or M.
Units
■
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information menu can
be changed while driving.
G-force
■
Displays lateral G-forces on the vehi-
cle
Reading the display
• Normal display
Displays the following on the multi-infor-
mation display
A
Acceleration G-force on the vehicle
B
Current G-force value (analyzed value
of front/rear and left/right G-forces)
• Advanced display
Displays the following on the multi-infor-
mation display and main meter
Multi-information display: