Hybrid System Overheat Warning Light (Warning Buzzer); Front Passenger Detection Sensor, Seat Belt Reminder/Warning Buzzer; If The Malfunction Indicator Lamp Comes On While Driving - Lexus LC 500 Owner's Manual

Hide thumbs Also See for LC 500:
Table of Contents

Advertisement

390
7-2. Steps to take in an emergency

Hybrid system overheat warning light (warning buzzer)

Warning
light
Indicates that the hybrid system has overheated
This light may be displayed when driving under severe operating conditions.
(For example, when driving up a long steep hill.)
 Stop the vehicle in a safe place.
Handling method (P.419)
*
: This light illuminates on the multi-information display.
Front passenger detection sensor, seat belt reminder and warning buzzer
If luggage is placed on a front passenger seat, the front passenger detection sensor may
cause the warning light to flash and the warning buzzer to sound even if a passenger is not
sitting in the seat.
If a cushion is placed on the seat, the sensor may not detect a passenger, and the warning
light may not operate properly.

If the malfunction indicator lamp comes on while driving

For some models, the malfunction indicator lamp will come on if the fuel tank becomes com-
pletely empty. If the fuel tank is empty, refuel the vehicle immediately. The malfunction indi-
cator lamp will go off after several trips.
If the malfunction indicator lamp does not go off, contact your Lexus dealer as soon as possi-
ble.
Electric power steering system warning light (warning buzzer)
When the 12-volt battery charge becomes insufficient or the voltage temporarily drops, the
electric power steering system warning light may come on and the warning buzzer may
sound.
Tire pressure warning light
When a malfunction occurs in the tire pressure warning system, the tire pressure warning
light blinks to warn the driver. However, if the warning light blinks for 1 minute, and then
remains illuminated, making it difficult to determine whether the warning light is blinking,
turn the engine switch <power switch> from off to IGNITION ON mode <ON mode> and
check if the warning light blinks.
When the tire pressure warning light comes on
Carry out the following procedure after the tire temperature has lowered sufficiently.
Check the tire inflation pressure and adjust to the appropriate level.
If the warning light does not go out even after several minutes, check that the tire inflation
pressure is at the specified level and carry out initialization. (P.352)
The warning light may come on again if the above operations are conducted without first
allowing the tire temperature to lower sufficiently.
*
(LC500h)
Details/Actions

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc 500h

Table of Contents