Table of Contents
Advertisement
set seat position. Check the seat position.
WARNING
Lever-operated "Front, Fold &
■
Return" seat
●
Before operating the lever-operated
"Front, Fold & Return" seat, ensure that
any surrounding passengers or objects
will not contact the seat.
●
Make sure the seatback is locked
securely before driving.
Never operate the lever-operated
●
"Front, Fold & Return" seat while the
vehicle is moving.
Jam protection function
■
Do not use a hand, foot, or any other part
of your body to intentionally activate the
jam protection function.
3-3. Adjusting the seats
Driving position memory
This feature automatically adjusts
the positions of the driver's seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to suit your preferences.
Up to 3 different driving positions
can be recorded.
Each electronic key (including a
card key) can be registered to
recall your preferred driving posi-
tion.
Recording a driving position into
memory
1
Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
2
Check that the shift position is in P.
3
Adjust the driver's seat, steering
wheel, outside rear view mirrors
and head-up display to the desired
positions.
4
While pressing the "SET" button, or
within 3 seconds after the "SET"
button is pressed, press button "1",
"2" or "3" until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
137
3
Advertisement
Table of Contents
