Table of Contents
Advertisement
2
Remove the engine cover.
3
Remove the caps
A
4
Add coolant through the inlet of the cap
A
up to the "F" line
replace the cap
A
.
5
Add coolant through the inlet of the cap
B
until it is full, and then replace the
cap
B
.
WARNING
When inspecting under the hood of
■
your vehicle
Observe the following precautions.
Failure to do so may result in serious
injury such as burns.
●
If steam is seen coming from under the
hood, do not open the hood until the
steam has subsided. The engine com-
partment may be very hot.
7-2. Steps to take in an emergency
●
Keep hands and clothing (especially a
tie, a scarf or a muffler) away from the
fan and belts. Failure to do so may
cause the hands or clothing to be
caught, resulting in serious injury.
●
While the engine and radiator are hot,
do not loosen or remove the coolant
inlet cap or coolant reservoir cap.
High temperature steam or coolant
could spray out.
and
B
.
C
, and then
When adding engine coolant
■
Add coolant slowly after the engine has
cooled down sufficiently. Adding cool
coolant to a hot engine too quickly can
cause damage to the engine.
■
To prevent damage to the cooling sys-
tem
Observe the following precautions:
●
Avoid contaminating the coolant with
foreign matter (such as sand or dust
etc.).
Do not use any coolant additive.
●
NOTICE
417
7
Advertisement
Table of Contents
