Turning The Bsm Function/Rcta Function On/Off - Lexus rx350 2016 Owner's Manual

Turning the BSM function/RCTA function on/off

Press "" or "" of the meter control switches, select
1
Press "" or "" of the meter control switches, select "BSM".
2
Press "" or "" of the meter control switches, select "BSM" or "RCTA".
3
Outside rear view mirror indicator visibility
■
In strong sunlight, the outside rear view mirror indicator may be difficult to see.
Hearing the RCTA buzzer
■
The RCTA buzzer may be difficult to hear over loud noises, such as if the audio system
volume is high.
When there is a malfunction in the Blind Spot Monitor
■
If a system malfunction is detected due to any of the following, a warning message will be
displayed: (P. 641)
A sensor is malfunctioning
●
A sensor is dirty or covered with snow or a sticker
●
The outside temperature is extremely high or low
●
Sensor voltage is abnormal
●
A sensor is misaligned
●
Certification for the Blind Spot Monitor
■
For vehicles sold in the U.S.A.

FCC ID : OAYSRR3A
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user's authority to operate the equipment.
For vehicles sold in Canada

Applicable law : Canada 310
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Frequency bands : 24.05 - 24.25GHz
Output power : less than 20 milliwatts
Customization
■
Some functions can be customized. (P. 368, 699)
RX350_U_OM48E90U
4-5. Using the driving support systems
357
.
4