Table of Contents
Advertisement
Shifting the shift position from P to
■
other positions
While depressing the brake pedal
firmly, operate the shift lever. If the
shift lever is operated without
depressing the brake pedal, the
buzzer will sound and the shifting
operation will be disabled.
When selecting the shift position,
make sure that the shift position has
been changed to the desired posi-
tion by checking the shift position
indicator provided on the instru-
ment cluster.
The shift position cannot be
changed from P to M directly.
Automatic P position selection function
■
In the following situations, the shift position
is automatically changed to P.
●
When pressing the engine switch with
the vehicle stopped while the engine
switch is in ON and the shift position is in
a position other than P (after the shift
position has changed to P, the engine
switch will turn off)
●
When the driver's door is opened and all
of the following conditions are met, while
the shift position is in a position other than
P
• The engine switch is in ON.
• The driver is no wearing the seat belt.
• The brake pedal is not depressed.
To start off the vehicle after the shift position
is changed to P, operate the shift lever
again.
When the vehicle is stopped after the
●
engine has been stopped in an emer-
gency while driving
●
When voltage of the battery drops while
the shift position is in a position other than
P
*
: When the engine switch is pressed while
*
4-2. Driving procedures
driving at extremely slow speeds, such as
immediately before stopping the vehicle,
the shift position may automatically
change to P. Make sure that the vehicle is
completely stopped before pressing the
engine switch.
When the engine switch is changed to
■
ACC with the shift position held in N
●
Performing the following operations
allows the engine switch to be set to
ACC with the shift position held in N.
1
Operate the shift lever and change the
shift position to N when the engine is
running.
2
Return the shift lever to its regular posi-
tion (
).
3
Operate the shift lever to N and hold it
there until the buzzer sounds.
4
Press the engine switch within 5 sec-
onds after the buzzer sounds.
The engine switch will be set to ACC with
the shift position in N.
Make sure to check that the buzzer sounds
and "Holding N Push P Switch When
Done" is displayed on the multi-information
display.
●
To change a shift position to a position
other than N, press the P position switch.
*
: To keep this state, do not operate the
engine switch. If the engine switch is
operated repeatedly, the engine switch
will turn off after the shift position has
automatically changed to P.
■
If the shift position cannot be shifted
from P
There is a possibility that the battery is dis-
charged. Check the battery in this situation.
(P.332)
153
*
4
Advertisement
Table of Contents
