If the head restraint interferes with the child
restraint system installation and the head
restraint can be removed, remove the head
restraint. (P.142)
2
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top tether
strap.
Make sure the top strap is securely latched.
(P.81)
When installing the child restraint system
with the head restraint being raised, be
sure to have the top strap pass underneath
the head restraint.
Top strap
A
Hook
B
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
RC350-RC300_OM_General_OM24884E
1-2. Child safety
Firmly attach the top strap and make
●
sure that the belt is not twisted.
Do not attach the top strap to anything
●
other than the anchor bracket.
Shake the child restraint system left
●
and right, and forward and backward
to ensure that it has been securely
installed.
After securing a child restraint system,
●
never adjust the seat.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
When installing the child restraint sys-
●
tem with the head restraint being
raised, after the head restraint has
been raised and then the anchor
bracket has been fixed, do not lower
the head restraint.
NOTICE
Anchor brackets (for top strap)
■
When not in use, make certain to close
the lid. If it remains open, the lid may be
damaged.
83
1