Table of Contents
Advertisement
BSM function
The BSM function uses radar sensors to detect the following vehicles traveling in
adjacent lanes and advises the driver of the presence of such vehicles via the indi-
cators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside rear
A
view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not visible
B
using the outside rear view mirrors (the blind spots)
BSM function detection areas
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle
A
Approximately 1 m (3.3 ft.) forward of the rear bumper
B
Approximately 3 m (9.8 ft.) from the rear bumper
C
Approximately 3 m (9.8 ft.) to 60 m (197 ft.) from the rear bumper
D
*1
: The area between the side of the vehicle and 0.5 m (1.6 ft.) from the side of the vehicle
cannot be detected.
RC350-RC300_OM_General_OM24884E
4-5. Using the driving support systems
241
4
*1
*2
Advertisement
Table of Contents
