Fixture
F3
F2
F2X
R3
R2
R2X
R1
L2
B2
B3
When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
When installing a child seat with
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
no interference.
If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
RC350-RC300_OM_General_OM24884E
Full-height, forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Full-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Rearward-facing infant seat
L1
Left lateral-facing (carrycot) infant seat
Right lateral-facing (carrycot) infant seat
Junior seat
Junior seat
1-2. Child safety
Description
When installing a junior seat, if the
child in your child restraint system is
in a very upright position, adjust the
seatback angle to the most comfort-
able position. And if the seat belt
shoulder anchor is ahead of the
child seat belt guide, move the seat
cushion forward.
Child restraint system compati-
bility for each seating position
(for Thailand, Malaysia and
Argentina)
Child restraint system compatibil-
■
ity for each seating position
Compatibility of each seating position
with child restraint systems (P.61)
displays the type of child restraint sys-
tems that can be used and possible
seating positions for installation using
symbols.
59
1