Lexus RC 350 2019 Owner's Manual page 76

74 1-2. Child safety
the child seat and the seatback,
adjust the seatback angle until
good contact is achieved.
2 If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head
restraint. Otherwise, put the head
restraint in the upper most position.
(P.142)
3 Remove the anchorage covers, and
install the child restraint system to
the seat.
The bars are installed behind the
anchorage covers.
4 After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.73)
RC350-RC300_OM_General_OM24884E
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
After securing a child restraint system,
●
never adjust the seat.
When using the lower anchorages, be
●
sure that there are no foreign objects
around the anchorages and that the
seat belt is not caught behind the child
restraint system.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
Using a top tether anchorage
Top tether anchorages
■
Top tether anchorages are provided
for the each rear seat.
Use top tether anchorages when fixing
the top strap.
Top tether anchorages
A
Top strap
B
Fixing the top strap to the top
■
tether anchorages
Install the child restraint system in
accordance to the operation manual