3
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
RC350 (Left-hand drive vehicles)
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
RC350 (Right-hand drive vehicles)
Positive (+) battery terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the battery and any mov-
D
ing parts as shown in the illustration
RC350-RC300_OM_General_OM24884E
7-2. Steps to take in an emergency
on your vehicle and connect the
A
on the second vehicle. Then,
B
on the second vehicle and connect the
C
.
D
383
7