Table of Contents
Advertisement
RSA (Road Sign Assist) (if
equipped) (P.212)
Dynamic radar cruise control (if
equipped) (P.216)
Cruise control (if equipped)
(P.224)
Stop & Start system information
(if equipped)
Stop & Start system operation time
■
(current)/status notification
Displays the current amount of time
the engine has been stopped due to
the operation of the Stop & Start sys-
tem. Also shows the status of the Stop
& Start system with a pop-up display.
(P.227)
Stop & Start system total operation
■
time/amount of fuel saved
Press
to display the following items:
Stop & Start system operation time
(after start/after reset)
Displays the accumulated total of the fol-
lowing:
• Stop & Start system operation time since
engine start
• Stop & Start system operation time since
display was reset
Amount of fuel saved (after
start/after reset)
Displays the accumulated total of the fol-
lowing:
• Amount of fuel saved since engine start
• Amount of fuel saved since display was
RC350-RC300_OM_General_OM24884E
or
on the steering wheel
2-1. Instrument cluster
reset
Use the displayed amount of saved fuel for
reference only.
Stop & Start system settings
■
Press
on the steering wheel to dis-
play the Stop & Start system settings
screen.
On this screen, the following opera-
tions can be performed:
Stop & Start
The length of time the Stop & Start system
will operate when the "A/C" switch of the
air conditioning system is on can be set to
2 different levels. This setting can also be
changed on
.
Reset
Select to reset the Stop & Start system
operation time/amount of fuel saved dis-
play.
To reset, move the cursor to "Reset", and
then press and hold
.
Warning message display
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (P.355)
Settings display
The settings of the following items can
be changed using the meter control
switches.
For functions that can be enabled or
disabled, the function switches
between on and off each time
111
2
is
Advertisement
Table of Contents
