enclosed with the child restraint sys-
tem.
1
Adjust the head restraint to the
upmost position.
If the head restraint interferes with the child
restraint system or top strap installation
and the head restraint can be removed,
remove the head restraint. (P.142)
2
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is securely latched.
When installing the child restraint system
with the head restraint being raised, be
sure to have the top strap pass underneath
the head restraint.
Top strap
A
Hook
B
RC350-RC300_OM_General_OM24884E
1-2. Child safety
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
Firmly attach the top strap and make
●
sure that the belt is not twisted.
Do not attach the top strap to anything
●
other than the top tether anchorage.
After securing a child restraint system,
●
never adjust the seat.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
When installing the child restraint sys-
●
tem with the head restraint being
raised, after the head restraint has
been raised and then the top tether
anchorage has been fixed, do not
lower the head restraint.
NOTICE
Top tether anchorages
■
When not in use, make certain to close
the lid. If it remains open, the lid may be
damaged.
75
1