Lexus RC 350 2019 Owner's Manual page 115

which the excess speed notification will
start to operate when a speed limit sign is
displayed on the multi-information display.
 Other notifications
Select to set the notification method used
to warn the driver if the system detects the
following:
• The vehicle is overtaking when a no
overtaking sign is displayed on the
multi-information display.
• The vehicle is entering a no-entry area
when a no-entry sign is displayed on the
multi-information display.
*
: Vehicles with navigation system
Vehicle Settings
■
 Stop & Start system (if equipped)
Select to set the length of time the Stop &
Start system will operate when the "A/C"
switch of the air conditioning system is on.
 Oil maintenance (if equipped)
(P.317)
Select to reset the engine oil maintenance
information (message indicating mainte-
nance is required and distance until the
next oil change) after engine oil mainte-
nance is performed.
Meter settings
■
 Language
Select to change the language on the dis-
play.
 Units
Select to change the units of measure dis-
played.

Eco Driving Indicator Light
(P.108)
Select to enable/disable the Eco Driving
RC350-RC300_OM_General_OM24884E
Indicator Light.

SPORT models)
Displays a procedure to register a desired
screen to
You can register 1 screen as a shortcut,
which can be displayed by pressing
.
 Drive information screen (P.107)
Select to choose between 2 items that will
be displayed on each drive information
*
screen ("Drive info 1", "Drive Info 2" and
"Drive Info 3") respectively.
 Pop-up display (P.104)
Select to enable/disable the pop-up dis-
play.
• Intersection guidance (if equipped)
• Incoming calls
• Audio Feedback (F SPORT)
• Volume Feedback (F SPORT)
•
•
• Brightness adjustment
 Color (except F SPORT models)
Select to set the color of the cursor on the
multi-information display.
 Needle (F SPORT models)
Select to set the tachometer needle color.
 Rev indicator (F SPORT models)
(P.103)
• Select to enable/disable the Rev indica-
tor.
• Select to set the desired engine speed at
which the Rev indicator will begin to be
2-1. Instrument cluster
Switch settings (except F
.
Duration (if equipped)
Status (if equipped)
113
2