Lexus RC 350 2019 Owner's Manual page 83

Hide thumbs Also See for RC 350 2019:
Table of Contents

Advertisement

slowly return it to the stowing position.
When installing a child restraint system
You may need a locking clip to install the
child restraint system. Follow the instruc-
tions provided by the manufacturer of the
system. If your child restraint system does
not provide a locking clip, you can purchase
the following item from your Lexus dealer:
Locking clip for child restraint system (Part
No. 73119-22010)
WARNING
When installing a child restraint sys-
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
Do not allow children to play with the
seat belt. If the seat belt becomes
twisted around a child's neck, it may
lead to choking or other serious inju-
ries that could result in death. If this
occurs and the buckle cannot be
unfastened, scissors should be used to
cut the belt.
Ensure that the belt and plate are
securely locked and the seat belt is not
twisted.
Shake the child restraint system left
and right, and forward and backward
to ensure that it has been securely
installed.
After securing a child restraint system,
never adjust the seat.
When a junior seat (booster seat) is
installed, always ensure that the shoul-
der belt is positioned across the center
of the child's shoulder. The belt should
be kept away from the child's neck, but
not so that it could fall off the child's
shoulder.
RC350-RC300_OM_General_OM24884E
1-2. Child safety
Follow all installation instructions pro-
vided by the child restraint system
manufacturer.
Child restraint system fixed with
an ISOFIX lower anchorage
ISOFIX lower anchorages
(ISOFIX child restraint system)
Lower anchors are provided for the
each rear seats. (Mark displaying the
location of the anchors are attached to
the seats.)
When installing in the rear out-
board seats
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
1
Adjust the seat
If there is a gap between the child
seat and the seatback, adjust the
seatback angle until good contact
is achieved.
2
If the head restraint interferes with
the child restraint system installa-
tion and the head restraint can be
removed, remove the head
restraint. (P.142)
81
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rc 300 2019

Table of Contents