lated air modes.
3
Adjust the temperature setting.
4
To stop the operation, press
function menu.
Automatic mode indicator
■
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
Adjusting the temperature for
■
driver and passenger seats sepa-
rately ("DUAL" mode)
To turn on the "DUAL" mode, perform
any of the following procedures:
Press
Select "DUAL" on the option con-
trol screen.
Adjust the passenger's side temper-
ature setting.
The indicator comes on when the "DUAL"
mode is on.
While in "DUAL" mode, the temperature of
the rear air outlets is set at the right-hand
side temperature setting.
Other functions
Switching between outside air and
■
recirculated air modes
Type A
Press
The mode switches among
RC350-RC300_OM_General_OM24884E
or select "Off" on the sub
.
.
(recircu-
5-2. Using the air conditioning system
lated air mode), automatic and
side air mode) modes each time the button
is pressed.
When the system is switched to automatic
mode, the air conditioning system operates
automatically.
The indicator above the selected button
comes on.
Type B
Press
The mode switches between
culated air mode) and
mode) modes each time the button is
pressed.
The indicator above the selected button
comes on.
Pollen removal mode
■
Pollen is removed from the air and the
air flows to the upper part of the body.
Select
on the option control
screen.
When pollen removal mode is on,
displayed on the air conditioning control
screen.
In order to prevent the windshield from
fogging up when the outside air is cold, the
dehumidification function may operate.
Pollens is filtered even if the pollen removal
mode is turned off.
Defogging the windshield
■
Defoggers are used to defog the wind-
shield and side windows.
Press
(
Set the outside/recirculated air mode but-
269
(out-
.
(recir-
(outside air
is
).
5