cruise control.
2
Accelerate or decelerate, with
accelerator pedal operation, to the
desired vehicle speed (above
approximately 40 km/h [25 mph])
and push the lever down to set the
speed.
Cruise control "SET" indicator and set
speed will be displayed on the multi-infor-
mation display.
The vehicle speed at the moment the lever
is released becomes the set speed.
Adjusting the set speed
To change the set speed, operate the
lever until the desired set speed is
obtained.
RC350-RC300_OM_General_OM24884E
4-5. Using the driving support systems
1
Increases the speed
2
Decreases the speed
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
The set speed will be increased or
decreased as follows:
Fine adjustment: By approximately 1 km/h
*1
(0.6 mph)
or 1 mph (1.6 km/h)
time the lever is operated.
Large adjustment: The set speed can be
increased or decreased continually until
the lever is released.
*1
: When the set speed is shown in "km/h"
*2
: When the set speed is shown in "MPH"
Canceling and resuming the
constant speed control
1
Pulling the lever toward you can-
225
4
*2
each