68
1-2. Child safety
Includes a top tether anchorage
point.
Never use a rear-facing child
restraint system on the front pas-
senger seat when the airbag man-
ual on-off switch is on.
*1
: Move the front seat fully rearward. If the
passenger seat height can be adjusted,
move it to the upper most position.
*2
: Adjust the seatback angle to the most
upright position. When installing a for-
ward-facing child seat, if there is a gap
between the child seat and the
seatback, adjust the seatback angle
until good contact is achieved.
Detail information for child restraint systems installation
■
Seat position number
Seating position suitable for uni-
versal belted (Yes/No)
i-Size seating position (Yes/No)
Seating position suitable for lateral
fixture (L1/L2/No)
Suitable rearward facing fixture
(R1/R2X/R2/R3/No)
RC350-RC300_OM_General_OM24884E
*3
: If the head restraint interferes with your
child restraint system, and the head
restraint can be removed, remove the
head restraint.
Otherwise, put the head restraint in the
upper most position.
*4
: Use only a front-facing child restraint
system when the airbag manual on-off
switch is on.
Seating position
Airbag manual on-off
switch
ON
OFF
Yes
Yes
Forward
facing only
No
No
No
No
No
No
Yes
Yes
No
No
No
No
*
*
R1
R1