396
8-1. Specifications
Temperature range anticipated
A
before next oil change.
Oil viscosity (0W-20 is explained here
as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
RC350-RC300_OM_General_OM24884E
API Service Symbol
A
Top portion: "API SERVICE SN" means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: "SAE 0W-20" means the
SAE viscosity grade.
Lower portion: "Resource-Conserving"
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
B
The International Lubricant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
Engine oil selection (RC300)
■
"Toyota Genuine Motor Oil" is used in
your Lexus vehicle. Use Lexus
approved "Toyota Genuine Motor Oil"
or equivalent to satisfy the following
grade and viscosity.
Oil grade:
API grade SL "Energy-Conserving",
SM "Energy-Conserving" or SN
"Resource-Conserving" or SN PLUS
"Resource-Conserving"; or ILSAC
multigrade engine oil
Viscosity grade:
SAE 0W-20, 5W-20, 5W-30 and
10W-30