Basic Editing─Connecting A Contact In Parallel - Delta AH500 Hardware Operation Manual

A H 5 0 0 H a r d w a r e a n d O p e r a t i o n M a n u a l
6.5.5 Basic Editing
on the toolbar, and then move the mouse cursor to the input contact in network 2. The mouse
(1) Click
cursor will appear as a contact. Move the mouse cursor to the button of the input contact in network 2.
After the mouse cursor appears as
to the input contact in network 2 in parallel.
(2) Write the program in network 2 shown below in the way described above.
Additional remark
After users select a group of contacts, they can connect a contact to the group of contacts in the way
described above.
6 - 1 8
-
Connecting a Contact in Parallel
, users can click the left mouse button. A contact will be connected