System Information Printout (Ctrl + A); Calibration Mod8 - Powerware Plus 80 Operation

Meters Printout (Ctrl + M)
This key sequence prints the current readings of the UPS system meters. The Input
shows the phase-to-phase voltage, frequeflcy,
followed by the KVA. KW. and power
same information for the power being output by the UPS. The Bypass area shows the
phase-to-phase voftage
Supplying Load
U P S
Alarm:
Notice:

System Information Printout (Ctrl + A)

This key sequence prints
information shown on the Event History Log and Meters
Calibration Mode
Calibration mode is used by factory and field service
Factory assembly personnel calibrate the UPS meters prior to shipping so the UPS
at your site correctfy calibrated. After use. field service personnel may need to use
Calibration mode to racafibrate one or
inadvertent modification, this mode can be accessed only by trained
personnel using special software.
Powerware Plus 80 UPS Communication
of the bypass source. The Battery area displays the DC
a
Uninterruptible Power System
VBC VCA FREQ
4 8 0 4 8 0 480 60.0
080
PF
080 076 0.80
VCA
4 8 0
4 8 0 4 8 0
a
listing of all available serial data. This printout contains the
more meter settings.
and phase current of the incoming utility,
03 JAN 1994 14:22:4'
output
VBC VCA FREQ
208 208 208 60.0
PF
0880.80
0 7 6
I
1 2 0 ~+ 056
screens of the
UPS.
to calibrate system meters
area
1 1