Powerware Plus 80 Operation page 160

i
I '
creating an installation plan, 6
environmental requirements, 6
installing the UPS cabinet, 11
sequence of steps, 5
site preparation, 6
unpacking cabinets, 7
installing caster assemblies, 14
italic type in this book, 2
joining cabinets, 21
leveling feat
illustration, 14
raising and lowering. 14
line-to-line load unbalance,
0
operational and startup checks. 5
optional cabinets, preparing the UPS cabinet for,
packaging material, removing, 6
PDM cabinet, distribution panel poles, A-6
point loading, 6
power cable terminations, A-6
power distribution module
connection points to UPS, 44
installation, 43
joining to the input traneformar
joining to the UPS, 21,22
preparing for wiring to UPS, 44
preparing the UPS cabinet for,
rear joining clamps, seating. 25
relay interface module (RIM), preparing the UPS
I
remote battery disconnect
external wiring requirements, 51
knockout pattern, 50
I
recommended, A-5
1 9
46
cabinet for, 19
Plus 80 UPS Operator's Manual
remote EPO
illustration, 47
installation, 47
installation note, A-7
preparing the UPS cabinet for, 19
wire terminations, 47
wiring and ratings, 46
remote monitor panel (RMP), preparing the UPS
cabinet for, 19
S
sample UPS system, illustration, 1
site acceptance, 6
site preparation, 6
size and weight requirements, UPS, 6
source protection, A-5
startup and operatlonaf
surge protection devicea, A - 5
system conftgurattons.
temperature ranges, 6
U
unpacking cabinets. 7
unpacking the UPS cabinet 13
UPS
equipment weight, 6
external wiring requirements, A-2
operating at high attitudes.
operating environment, 6
point loading, 6
possible con5gurdtions.
ratings. A-2
cabinet. 21.25 recommended cfearance over, A-3
sample system, illustra9on,
site preparation, 6
19
ventilation requirements, A-3
UPS cabinet
preparing for installing battery cabinets,
unloading, 13
warning boxes in this book, 2
warranty information, 3
wiring requirements, external. A-2
checks, 5
1
6
1
and operattonal
notes. 12