Powerware Plus 80 Operation page 32

Select lime from the Setup menu to display the Time Setup screen The Time Setup
screen allows you to set the internal timestamp of the UPS. The timestamp is used for
logging events in the Event History Log. Figure 16 shows the Time Setup screen.
The small return arrow (W) appears in the upper right comer of the Time Setup screen.
This arrow is a reminder that you can press the W pushbutton on the Monitor Panel to
toggle the pushbuttons between the menu box and tf?e information area When the scroll
bar is in the informatlon area, the return arrow ls in the menu box. When the scroll bar is in
the menu box. me return armw is in me inforrnatfon area.
When the scroll bar appears in the information area, you can use the pushbuttons to
change the time-stamp settinga. To change a setting in the timestamp, press the 0 and 0
pushbuttons to highlight the sethng you want to change. To increase the setting (make it a
higher value), press the 0 pushbutton. To decrease the setting (make it a lower value).
sure me SAVE
29