Powerware Plus 80 Operation page 134

Table K. RIM Wire Terminations
F r o m RMP 6 (if US@
l-81 -4
its connections prior to making connections with Jl - J4.
You can order interface cables separately for connecting to the 15pin D-sub
connectors.
Repeat steps 1 through 6 for each RIM you are installing. You can install up to
three RIMS or RMPs.
7. After installing all RIMS or RMPs, secure the UPS cabinet by reversing all steps
of the procedure used to prepare the UPS (see page 19).
the terminations shown in
UPS
Remarks
To
TWISTED WIRES (4)
1-2
TURNS PER
3
INCHES
T o U P S Remarks
TWISTED WIRES (4)
l-2 TURNS PER
3
INCHES
5 9