Meters Printout (Ctrl + M); System Information Printout (Ctrl + A); Figure 28. System Meters - Powerware 9315 Operation Manual

Meters Printout (Ctrl + M)

This key sequence prints the current readings of the UPS system meters. The
Input area shows the phase-to-phase voltage, frequency, and phase current of the
incoming utility, followed by the kVA, kW, and power factor measurements. The
output area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The
Battery area displays the DC voltage (V) and the DC current (I). Figure 28 shows
a sample Meters printout.
UPS System Normal
Alarm:
Notice:

System Information Printout (Ctrl + A)

This key sequence prints a listing of all available serial data. This printout contains
the information shown on the Event History Log and Meters screens of the UPS
(both Figures 27 and 28).
48
Uninterruptible Power System
None
None
Input
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC
480 480 480
KVA KW PF
399 379 0.95
Bypass
VAB VBC VCA
480 480 480

Figure 28. System Meters

03 JAN 1997
Output
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC IN
361 361 361 0
KVA KW PF
300 240 0.80
Battery
V I
+
540 0
Powerware 9315 (200 kVA ---300 kVA) Operation
14:22:49
164201036 Rev. D 041500