Performing Preventive Maintenance; Maintenance Training - Powerware Plus 80 Operation

Performing Preventive Maintenance

The UPS requires very littte preventlle
inspected periodically to verify that the unit is operating normally and that me batteries are
in good condition.
You should
Check me area surrounding the UPS
l
Be sure the air intakes (vents on the front doors) and exhaust fan (on top of
l
the UPS cabinet) are not blocked.
Se sure that there is at least 6 inches of clearance behind the
l
air circulation.
Be sure that me operating environment is within
l
"Product Spacktcations'
Be sure that the UPS is in Norma) mode (the Norma) status indicator is tit). If
l
an alarm lamp is iii. or me Norma) status indicator is not
You should perform these checks MONlHLt
sure
Se that all status indicator lamps are operative.
l
pushbuttons simultaneously to
Monitor system pammaters
l
page 19.
Check the air fitters (located behind the front doors) and replace them as
l
Record me results of your checks and any corrective actions in a
l
in case you need to refer to your notes later.
ANNUAL malntenanca:
Annual preventfve
familiar with maintenance
service ofike for mom informatton
maintenance:
Contact your nearest tletd service oftica for battery maintenance. Sattery replacement and
maintenance should ba performed onty by authorized service personnel.
Maintenance 'lkaining
A basic training course, avaifabfe
knowledge of UPS operation
maintenance. For more information about training and other services, contact
Training Coordinator in Raleigh, North Carolina, or call
1 -oO-&ExlDE
Plus 80 UPS Operator's Manual
maintenance. However, the UPS should be
Se sure the area is uncluttered, giving
me parameten
on page NO TAG.
as described in 'Using the Monitoring Panel' on
should be performed only by authorized service personnel
and sarviclng of me UPS system. Contact your nearest field
about sewtce offerings.
from &de Electronics, gives you a competent working
and teaches you how to perform first level corrective
(Press the 0 and 9