Powerware Plus 80 Operation page 123

I
REMOTE
EPO
SWITCH
Remote EPO switch. rating is 24 VDC.
switch, and not tied into any other cIrcuita
4. If you are installing multiple Remote EPO stations, wire additional stations in
parallel with the first Remote EPO.
5. If required, install l/2" conduit and wiring from the Remote EPO station to trip
circuitry of upstream protective devices. A normally open contact is provided,
as shown in Table F on page 48. Remote EPO switch wiring must be in
accordance with UL Class II.
6.
Secure the UPS by reversing all steps taken to prepare k for Remote EPO
installation.
Table F. Remote EPO
WIRES (2)
a
Installation Manual