Figure 15; Meters Printout (Ctrl + M); System Information Printout (Ctrl + A) - Powerware Uninterruptible Power Supply Installation And Operation Manual

15.5.3 Meters Printout (Ctrl + M)

This key sequence prints the current readings of the UPS system meters. The
Input area shows the phase-to-phase voltage, frequency, and phase current of the
incoming utility, followed by the kVA, kW, and power factor measurements. The
output area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The
Battery area displays the DC voltage (V) and the DC current (I). Figure 15---5
shows a sample Meters printout.
UPS System Normal
Alarm:
Notice:

15.5.4 System Information Printout (Ctrl + A)

This key sequence prints a listing of all available serial data. This printout contains
the information shown on the Event History Log and Meters screens of the UPS
(both Figures 15---4 and 15---5).
Powerware 9315 (500 kVA- -750 kVA) Installation and Operation
164201244 REV. D 030101
Uninterruptible Power System
None
None
Input
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC
640 640 640
KVA KW PF
530 505 0.95
Bypass
VAB VBC VCA
480 480 480
Figure 15 ---5. System Meters Screen
03 NOV 1997
Output
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC IN
480 480 480 0
KVA KW PF
400 320 0.80
Battery
V I
+
540 0
14:22:45
15--9