Environmental Specifications; Battery Specifications - Powerware Plus 80 Operation

Environmental
Operating Temperature
Storage
storage)
Immunity
System Efttclency at Full Unity
Power Factor Load and Nomlnal
Input Voltage

Battery Specifications

These specif~catlons are for batteries
match caometa:
Nomlnal Sattwy String Voltage
float Charging
I
42
Specifications
Temperature
Discharge (ESD)
Charge Current Umlt
0 to 4O'C without derating. However, operating
at or near 40°C will adversely affect battery life
(refer to your battery specifications for more
information). The recommended operating
temperature is 25-C.
Maximum 5000 ft. (15OOm)
95% maximum non-condensing
55dSAatalmdistance
Meets FCC Part 15, Subpart J. for class A
devices.
Meets IEC SO1 -2 specifications. Withstands up
to 25 kV without damage and with no
disturbance or adverse effect to the
Note: The 208 systems use
an input auto transformer
option thet n3dlJces system
efficiency by 1% to 2%. The
input isoletion bansformer
option mduce.s system
efficiency by 3%
Seated, maintenancefree.
lead acid cells
2.25 VOC per cell
(540 VOC based on 240 cells)
set to 540 VDC at factory
on inverter
without derating
high rate discharge,