When Trouble Occurred; When Attention Indicator Turns On Or Blinks - Kyocera Taskalfa Pro 15000c Operation Manual

Troubleshooting > When Trouble Occurred

When Trouble Occurred

Some of the symptoms that appear to be problems can be solved by yourself. This section describes how to solve such
problems. If any trouble occurs, look into the following checkpoints before considering this as a failure.
When the print or copy image trouble occurs, refer to the following.
Troubleshooting When Printing or Copying Image (page 19-6)
When the paper feeding/output problem occurred, refer to the following.
Troubleshooting When Feeding Paper (page 19-17)
Clearing Paper Jams (page 19-21)
Clearing a Staple Jam (page 19-29)
If other problems such as printing can not start or transmission was failed, refer to the following.
Printing does not start (page 19-33)
Troubleshooting When Using Send Function (page 19-35)
About paper output when a specific error occurs (page 19-42)
Responding to Messages (page 19-43)
If the problem was not solved even after implementing the action described here, contact your Service Representative.
NOTE
• When contacting us, the product name and serial number will be necessary.
To check the serial number, refer to the following:
Display Setting Screen (page 4-3)
• If any message, error code (Cxxx) or jam code (Jxxx) is displayed on the operation panel, take note and inform us of
it when making an inquiry.

When Attention indicator turns on or blinks

The Attention indicator will light up or blink, depending on the status of the machine.
If an error code in the format Fxxx (where x is a number) appears on the Operation Panel, the Attention indicator will
light up. Switching the power switch off and then on may fix the problem, but if the Attention indicator remains on after
doing so, contact your service technician.
Attention indicator
19-2