Kyocera Taskalfa Pro 15000c Operation Manual page 347

Using Various Functions > About Functions
Sending/Storing
NOTE
This cannot be set when Text Stamp is set in the system settings.
Sending Jobs (page 15-61)
Storing Jobs (page 15-63)
Item
Off
On Stamp
Position
Any text string (32 characters
or less), Template 1 to 8
Position Top Left, Top Middle, Top
Right, Middle Left, Center,
Middle Right, Bottom Left,
Bottom Middle, Bottom Right
Nudge Top/Bottom: -10 to +10 mm
Left/Right: -10 to +10 mm
Rotation 0 to 359 degrees
Value
Select the text entry box and enter the text
string you want to print, or select the text
stamp you want to print from the displayed
templates.
After selecting the stamp, select [Next].
Templates that have been set will appear.
Set the stamp position to be printed.
Select [Position] and select the text stamp
position.
You can set stamp position details and the
angle of the stamp.
Fine adjust the position of the stamp.
Set how many degrees you want to rotate the
stamp from the left or right.
13-39
Description
NOTE
Text (Text Stamp) (page 15-35)