Wired Network Settings - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Network Settings

Wired Network Settings

[System Menu/Counter] key > [Network Settings] > "Network Settings" [Wired Network Settings]
Configure wired network settings.
TCP/IP Settings
Item
TCP/IP
IPv4 Settings
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
DNS Server Address
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/
IP] is set to [On].
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use the following DNS Server
NOTE
When [Use the following DNS Server] is selected, you can enter static DNS server
information in the Primary and Secondary fields provided.
15-48
Description