Storing Jobs - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Security Settings

Storing Jobs

[System Menu/Counter] key > [Security Settings] > "System Stamp" [Storing Jobs]
Configure stamp settings for storing documents in USB drive.
After configuring the setting, return to the Custom Box (Storing Documents) screen from System Menu, and select the
[Reset] key.
Item
Text Stamp Text Stamp
Edit Text
Position
Font
Select whether to print a text stamp on all sending jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed
when sending.
Select a text string to be stamped from templates, or enter a
maximum of 32 characters for the text string.
NOTE
Templates that have been set will appear. For details on registering
templates, refer to the following:
Text (Text Stamp) (page 15-35)
Position Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center,
Middle Right, Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values, and to set
the stamp angle.
Nudge Set the nudge.
Value:
Top/Bottom: -10 to 10 mm (in 1 mm increments)
Left/Right: -10 to 10 mm (in 1 mm increments)
Rotation Set how many degrees you want to rotate the stamp from the left or
right. You can enter the angle from 0 to 359 degrees.
Set the font of the text stamp.
Value:
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font Size (Text Stamp) (page 15-35)
Character Border: Off, Circle, Rectangle, Underline
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Clipping, Overwrite
Density: 10 to 100% (in 10% increments)
15-63
Description