About Paper Output When A Specific Error Occurs - Kyocera Taskalfa Pro 15000c Operation Manual

Troubleshooting > Other Trouble

About paper output when a specific error occurs

If you select [Display error] in [Error Handling] when the following error occurs, a message is displayed and printing is
stopped.
• Wrong Size Paper Loaded
• Paper Centering Error
• Eject Ink Where There Is No Paper
When 4,000-sheet Finisher or 5,000-sheet Stacker is specified as the paper output, the paper after the error occurs is
output to the Top tray of the Inverter and Decurler Unit. If switching of the output can not be made in time, it will be output
to the internal tray of the Inverter and Decurler Unit.
IMPORTANT
In the following cases, the paper output is not changed after an error is detected.
• When the paper output is the Right tray
• When discharging the banner paper from the Top tray of the Inverter and Decurler Unit
• When switching to the Top tray of the Inverter and Decurler Unit is not in time when discharging to the Top
tray of 5,000-sheet Stacker (For index paper, postcard and paper length is 280 to 488.1 mm)
• When switching to the Top tray of the Inverter and Decurler Unit can not be made in time when discharging
to the 4,000-sheet Finisher (when the paper length is 488.1 to 700 mm)
Since the normal print job and error paper are mixed, remove the wasted paper from the paper output.
19-42