Send/Store; Email; Sending Job - Folder - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Function Settings

Send/Store

[System Menu/Counter] key > [Function Settings] > [Send/Store]
Item
Default Screen
Quick Setup Registration (Send)

Email

[System Menu/Counter] key > [Function Settings] > [Email]
Item
Email Settings SMTP (Email TX)
SMTP Server Name
SMTP Port Number
Sender Address
POP3
Remote Printing

Sending Job - Folder

[System Menu/Counter] key > [Function Settings] > [Sending Job - Folder]
Item
FTP Settings
SMB Settings
Select whether to send documents using FTP. To use the FTP Client, set the protocol to
[On] for "Protocol Settings". The default port number is 21.
Value: Off, On, 1 to 65535 (Port number)
Select whether to send documents using SMB. To use the SMB Client, set the protocol to
[On] for "Protocol Settings". The default port number is 445.
Value: Off, On, 1 to 65535 (Port number)
Set the default screen displayed when you select the [Send] key.
Value: Destination, Address Book
Quick Setup Registration (Send) (page 15-9)
Select whether to send E-mail using SMTP.
Value: Off, On
Enter the host name or IP address of the SMTP server.
Specify the port number to be used for SMTP.
The default port number is 21.
Value: 1 to 65535 (Port number)
Specify the sender address for when the machine sends Emails,
such as the machine administrator, so that a reply or non-delivery
report will go to a person rather than to the machine. The sender
address must be entered correctly for SMTP authentication. The
maximum length of the sender address is 256 characters.
Select whether to receive E-mail using POP3.
Value: Off, On
Remote Printing (page 15-43)
Description
15-39
Description
Description