Behavior Adjustment - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Adjustment/Maintenance
Item
Auto Color Correction
Correcting Black Line
Color Registration - Auto
Color Registration - Manual
Head Cleaning

Behavior Adjustment

[System Menu/Counter] key > [Adjustment/Maintenance] > "Behavior Adjustment"
Item
Correct Paper Curl
This setting allows you to adjust the detection level used by the machine to determine
whether the original is color or black and white in Auto Color Selection Mode. Setting
a lower value will result in more originals being identified as color, while a larger value
will tend to increase the number of originals being identified as black and white.
Value: 1 (Color), 2, 3, 4, 5 (B & W)
Correct fine lines (streaks caused by contamination), which may appear on the
image, when the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original
may become lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The
reproduction of fine lines on the original may become lighter than when using
[On (Low)].
When first installing the machine or moving it to a new location, color drift during
printing may occur. Use this function to correct the color position of each of cyan,
magenta and yellow to resolve color drift.
Correcting Color Drift (page 18-3)
When the printed images are totally, too light, periodically faint or show white lines,
use this function to clean the print head or correct the nozzle state.
Reducing color dropout and white streaks (page 18-8)
Select the method to correct the paper curl.
Value:
Auto: Automatically corrects the paper curl.
Reduce Downcurl: Reduces the downcurl of the paper.
Reduce Upcurl: Reduces the upcurl of the paper.
15-67
Description
Description