Table of Contents
Advertisement
2. Slot 2 Adaptor Cover with bracket
3. PCI Adaptor Retainer Bracket
5. Remove the Slot2 Adaptor Assembly board Bracket by levering it from the top, so the
bracket is freed from the locking slot located towards riser board. Once removed you can
access theTP260 gateway board connectors, after installing the board on to riser board.
6. Slide the PCI-Adaptor retainer bracket sideways so that it frees up the space for mounting
TP260 Gateway board.
7. Insert the TP260 board into the riser connector mounted on the slot2 adaptor assembly.
a. Verify that the TP260 Board Bracket is locked into the slot on the slot2 Adaptor Assembly
towards riser board.
b. Ensure the TP260 board is firmly inserted into the riser board PCI connectors.
8. Slide back the PCI-Adaptor retainer bracket so that the board sits in the retainer bracket
groove and locks the board to the slot2 adaptor assembly.
9. Install the Slot 2 Adaptor Assembly into the server slot 2. Make sure slot 2 assembly riser
card is firmly inserted into the server motherboard connectors, and push back retention
latches sideways so that it firmly locks and holds the slot 2 adaptor Assembly.
Installing the TP-260
Issue 1 July 2006
49
Advertisement
Table of Contents
