Avaya S6200 Manual page 25

Installing the S6200 Application Server
Install the cable-management arm:
Insert the cable-management arm into the five
slots in the rear of the server. When the
cable-management arm is inside all five slots,
slide the cable-management arm to the left by
pulling the locking cam back, away from the
server.
Connect the cables and secure the
cable-management arm to the rack:
Pull the cable-management arm away from the
server, and connect the cables to the server.
Route the cables through the
cable-management arm. Move the
cable-management arm toward the rail on the
right side, and snap the latch onto the rail.
Issue 1 July 2006 25