Avaya S6200 Manual page 52

Updating Hardware
2. Double click the bootp shortcut to launch the application. The application displays the
AudioCodes BootP/ TFTP Server screen.
1
Figure notes: TFTP Server Buttons
1. Pause
2. Edit Client Button
3. Edit Templates
4. Clear Log
5. Filter Clients
6. Reset
Tip:
BootP buttons are grey when selected. To assure that bootP client requests
Tip:
receive responses, make sure none of the buttons are grey (normal operation).
52 Installing the S6200, S6500, and S6800 Conferencing Server
5
3
6
4
2
When you select this button, replies are not sent to BootP Request
messages. When this button is not selected, then the system replies to
all BootP Request messages received from Bootp Clients.
Click this button to enter Client Configurations.
TBD for later use
Click this button to clear all entries from the log window portion of main
application screen.
Click this button to prevent the BootP Tool from logging BootP requests
received from disabled clients or from clients that do not have entries in
the client table.
Click this button to open a window that allows you to enter the IP
Address for Gateway card that you want to Reset,