Table of Contents
Advertisement
Getting Started
The standby application server takes over automatically as necessary with a configurable
period and exception count. The schedules from the CRS database are pushed to all
application servers (active and standby) so that conferences are available on all application
servers in case of any type of failover.
KVM Switch
A Keyboard/Video/Mouse switch (KVM) should be installed to allow one monitor and keyboard
to connect to the S6200/S6500/S6800 Conferencing Server and up to three associated
application or hardware media servers.
Installation Steps
Installation consists of the following steps:
1. Verify installation of power, thermal management, LAN, and network connections.
2. Verify receipt of necessary hardware and cables.
3. Mount hardware to racks or as specified.
4. Connect power, keyboard/video/mouse, modems, LAN, and network connections.
5. Verify system operation.
6. Notify Support Help Desk that system is ready to be configured. Note any discrepancies
between installed facilities and Site Survey.
12 Installing the S6200, S6500, and S6800 Conferencing Server
Advertisement
Table of Contents
