Table of Contents
Advertisement
Updating Hardware
AudioCodes ships the TP260 cards with the following default network configurations:
IP Address
Default Gateway 10.1.10.1
Subnet Mask
The AudioCodes board power cycles when the S6200 server starts.
The BootP application displays a client entry with the corresponding MAC Address. This MAC
Address should match the recorded MAC Address of the gateway card.
1. Double click the client entry to open the Client Configuration screen.
Client Configuration parameters are described below:
.
Client MAC Address
Client MAC
Client Name
Template
IP
54 Installing the S6200, S6500, and S6800 Conferencing Server
10.1.10.10
255.255.0.0
Gateway Card MAC Address
The IP address of the MAC.
Name of the client to be referred by bootP Server
<none>
Boards Static IP Address
Advertisement
Table of Contents
