Outputs - Siemens SIRIUS M200D Manual

Functions
3.7 System monitoring
Messages and actions
Input 1
Input 2
Input 3
Input 4
Input tripping
Input tripping - end position CW rotation
Input tripping - end position CCW rotation
Input control
Input warning
Sensor supply overload
Quick stop active
3.7.4

Outputs

Description
The motor starter can use the "outputs" function to control various actuators (e.g. indicator
lights or signalling auxiliary switches). Control can take place here from different control
sources. Different functions and information can be parameterized for each of the outputs.
The digital outputs are overload-protected and short-circuit-proof and are supplied from the
DC24V-S load voltage supply.
Output n level
With this device parameter, you determine whether the control signal of the output is inverted
or not dependent on the set parameter.
Output n signal
With this device parameter, you determine how the signal is to be output:
● Continuous signal
● Flashing
Output n action
Different parameterizable actions can be triggered when an output signal is present.
60
Message Action
Dependent on parameterization
Dependent on parameterization
Dependent on parameterization
Dependent on parameterization
Trip
Tripping
(must be acknowledged with Motor OFF)
The motor is controlled via the inputs
The motor is controlled via the inputs
Tripping
(must be acknowledged with trip reset)
The signal states of all inputs are undefined in the
event of a "sensor overload".
Trip
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004