Siemens SIRIUS M200D Manual page 146

Diagnostics
7.1 Diagnostics with LED
Group fault
SF
LED
Red
Depends on the parameter assignment
1)
Device diagnostics
In the process input image of the starter, any pending group faults (DI 0.2) and group
warning messages (DI 0.3) are transferred cyclically. Further information about the type of
error can be accessed via a diagnostics call (system diagnostics).
All device-specific diagnostics are collected in data set 92 (29 bytes). The content of DS 92
can be read out with the help of "Motor Starter ES" via the device interface or also online via
PROFIBUS/PROFINET with the help of the "Read data set" function.
146
STATE LED DEVICE LED
Off Off
Group fault
Device diagnostics pending with enabled group
diagnostics
Thermal motor model overload
•
Temperature sensor overload
•
Asymmetry detected
• 1)
Current limit violation
• 1)
Connector monitoring
• 1)
Circuit breaker tripped/switched off
•
Group fault via input action
•
Communication module removed from motor starter
•
module
Manual, 08/2014, A5E01577426A/RS-AA/004
1)
1)
1)
M200D PROFIBUS/PROFINET