Control Outputs Outp - Siemens RWF50.3 User Manual

Only RWV50.2...
Binary outputs
Only RWF50.3...
Analog output
Parameter
Function
FnCt
Function
Signal type
SiGn
Type of signal
Value when out of
range
rOut
Value when out of
range
Zero point
OPnt
Zero point
End value
End
End value
Building Technologies Division
Infrastructure & Cities Sector

8.4 Control outputs OutP

With the RWF50.2, configuration of the outputs relates to the binary outputs (K2 and
K3), and with the RWF50.3, to the analog outputs (A+ and A-). The burner is released
via relay K1.
The switching states of relay K1 Burner release (LED green), relay K2 Controlling
element OPEN, and relay K3 Controlling element CLOSE (yellow LED arrows) are
indicated on the controller front.
The binary outputs of the RWF50.2 offer no setting choices.
The RWF50.3 has an analog output.
The analog output offers the following setting choices:
ConF  OutP 
Value/ Description
selection
1 Analog input
4 Controller's angular positioning is delivered (modulating controller)
0 0...20 mA
1 4...20 mA
2 DC 0...10 V
Physical output signal
Signal (in percent) when measuring range is crossed
0...101
101 = last output signal
-1999... A value range of the output variable is assigned to a physical output signal
0...
+9999
-1999...
100...
+9999
User Manual RWF50...
8 Configuration ConF
InP1
is delivered
45/64
CC1U7866en
25.07.2014