Ricoh FT8982 Operating Instructions Manual page 135

User Tools for Accounting Mode
User Tools 9, 10-1, 10-2, and 10-3 are for the
Accounting mode. When you want to use these User
Tools, you should enter the key operator access code
first. Please ask your sales or service representative for
the key operator access code.
9. Set accounting mode
Use to set the copier to accounting mode. If the copier is set to accounting mode, opera-
tors must input their user codes before the copier can be operated. The copier keeps
count of the number of copies made under each user code.
default: OFF
To prevent others from making copies using your user code, press the Clear/Stop key
and Clear Modes key simultaneously after copying.
Regarding setting user codes for accounting mode, use User Tool 10-1.
Regarding other functions of accounting mode, see User Tools 10-2 and 10-3.
10-1. Set user code(s)
Register
Change
Delete
To change the number entered, press the Clear/Stop key before touching the [#] key.
Use to register your user code (6 digits).
Up to 500 user codes can be registered.
Registered codes will be sorted in numerical order.
Use to change your present user code to a new one.
The number of copies made under the old code is added
to that made under the new user code.
Use to delete your user code.
The number of copies made under the deleted code is
also deleted.
USER TOOLS
127